What are the stages of the installation steps for indoor doors

When the interior door is transported from the manufacturer to the decoration owner's home, the components of each interior door are separately packaged and protected. When installing the interior door, it is necessary to assemble the components of the interior door, which involves the installation process of the interior door. Let's take a look together.

What are the stages of the installation steps for indoor doors

1. Preparation stage:

Before decoration, the interior door should be customized according to the actual situation, and after shipment, the packaging should be unpacked to ensure that all components are complete (especially hardware accessories). After that, prepare a hammer, ruler, rope, connectors, and special fasteners, and clean the ground to confirm whether the corners of the door opening have been polished smooth.

2. Construction stage:

First, we need to assemble the door jamb. In the previous preparation stage, we have already sorted out the various components of the indoor door, so at this time, we only need to connect the door pocket and the vertical plate according to the number. Next, install the door pocket into the door opening. This is an important indoor door installation step. We should first fix the surrounding areas of the door jamb, and pay attention to whether the door jamb is vertical to the ground. At this time, the indoor door installation standard is that the vertical error cannot exceed 2mm, and the horizontal error cannot exceed 1mm. Then it's time to install the door leaf, and the sealing strip must be properly made. Finally, the installation of hardware, including door locks, hinges, door latches, must be flexible and secure.

3. Acceptance stage

After the installation of indoor doors, everyone should pay attention to acceptance, which is also considered one of the steps for indoor door installation. At this time, the installation standard for indoor doors is that the joint between the door line and the ground should not exceed 3mm, while the door locks should be flexible, the connectors should be stable and tight, and the overall decoration effect of the indoor door should be good.